GROW SMARTER
Grow Room Accessories
From Hanging Equipment to DE Lamp Covers, ILUMINAR Lighting is your one-stop shop for all of your grow room lighting needs.
DE LAMP GLASS SHIELD
The ILUMINAR Lighting Double Ended (DE) Lamp Glass Shield is engineered to give single jacket Double Ended lamps a second layer of protection.
This DE lamp cover is a shield that protects from lamp failure and can be cleaned repeatedly and reused from one lamp to its replacement.
Our proprietary DE lamp glass shield is made using only the highest quality, commercial-grade borosilicate glass for maximum protection while maintaining the same PAR spectrum levels.
-
Constructed with high quality blast & shatter resistant materials
-
ANSI Standard
-
Can be repeatedly cleaned and reused
-
Can be used with HPS, MH, and CMH Lamps
-
Fully Compliant to Good Production Practices Cannabis Regulations from Health Canada section 5.1.5.3.
CHANGING YOUR ILUMINAR LIGHTING REFLECTOR?
We recommend measuring the lamp and reflector for aging every year to see if need to be replaced.
WIDE REFLECTOR
The ILUMINAR Liughting Wide Reflector allows fixtures to be mounted closer to the top of the canopy and is designed for lower ceilings.
The reflector was designed for low clearance environments with a wider light pattern of 36” to 48” spread over the garden.
FEATURES
-
German Aluminum material
-
96% Reflective
-
Allows for low canopy mounting
-
Clearance to plant canopy below 5’
-
Easy to install, no tools required
DEEP REFLECTOR
The ILUMINAR Lighting Deep reflector allows the fixture to be further from the top of the canopy and focus more essential PAR light on the plants.
Designed for High Ceilings with a narrow focused pattern of light around the 8’ to 10’ area.
FEATURES
-
German Aluminum material
-
96% Reflectivity
-
High Ceiling mounting, ideal for warehouse
-
Designed to penetrate 10’ above canopy
-
Easy to install, no tools required
ROPE RATCHETS
Heavy Duty Light Fixture Hanger
ILUMINAR Lighting Super Heavy Duty Light Fixture 1/8"
ROPE RATCHET HANGER
Attach the carabiner clip to secure your fixture, and pull tight to lock it into place at your desired height. Our metal gears won’t break or slip, and will not rust. Heat and Cold Temperature Resistant.
LED Wire Cables
The Hanging Cable Kit from ILUMINAR Lighting is a set of fully adjustable, galvanized steel aircraft cable hangers. Measuring 3 feet (36 inches) in length with a width of 1/16th inch, these cables can be used to suspend LED iLW & iLBar or DE grow lights. Kit includes four cables with 18 inch “Y” bottom legs and a Kwik Lock for adjusting the loop over a structure.
C HANGERS
The ILUMINAR Lighting C-Hangers Hanging Kits are easy to install as well as UNISTRUT compatible. This mounting hardware is the fastest and most affordable solution to your commercial UNISTRUT grow room.
HPS/MH UNISTRUT C-HANGERS
CMH DE UNISTRUT C-HANGERS
CMH SE 315W UNISTRUT C-HANGERS